H4 PTZ Camera Firmware

Version 3.30.0.40 – Released Jan 4, 2020

New Features

• Added support for high power PoE compatibility with Cisco UPoE standard, up to 60W over 4pairs.
• Updated camera’s webUI jQuery version.
• Added support to enable ONVIF analytics events for supported third party VMSes. This includessupport for bounding boxes on classified objects and events such as Analytics Line Detector,Field Detector and Loitering Detector. ONVIF compliant analytics metadata can be enabled inthe WebUI by selecting ‘Analytics’ tab under Setup.
• Added support for ethernet speed and duplex setting. The setting can be found in the ‘Network’tab under Setup on the camera’s WebUI.
• Added support to enable/disable Tamper detection. The setting can be found in the TamperDetection tab under Setup on the camera’s WebUI.

Version 3.28.0.148 – Released Nov 19, 2019

New Features

• Added support to set Subject Alternative Name via ONVIF or as a part of the certificate signing request.

Version 3.28.0.112 – Released Aug 16, 2019

Issues Fixed

• Fixed an issue where GetVideoEncoderConfigurationOptions under Media2 was not returning all configurable frame rates.
• Fixed an issue from 3.28.0.94 where the temporal filter strength was changed on firmware upgrade.

Version 3.28.0.98 – Released Aug 1, 2019

Issues Fixed

• Internal manufacturing release

Version 3.28.0.94 – Released July 25, 2019

Known Issues

• This release increased the noise filtering which may result in motion artifacts. Please upgrade to the latest version or adjust the temporal noise filtering

New Features

• Added support for ONVIF Profile T conformance.
• Added support for ONVIF analytics events. This includes support for bounding boxes on classified objects and events such as Analytics Line Detector, Field Detector and Loitering Detector.
• Added support for IPV6.

Issues Fixed

• Fixed an issue where ONVIF streaming may have issue with certain VMSs due to difference in interpretation of the ONVIF specification. Media services call GetGuaranteedNumberOfVideoEncoderInstances to camera will now return the maximum number of concurrent streams available instead of the minimum value of 1.
• Fixed an issue where 802.1x authentication over SSL protocol TLSv1.2 would fail.
• TLSv 1.0 disabled to improve security
• Fixed an issue where the camera drops and restarts stream if the requesting host has the term “VLC” in its name.
• Fixed an issue where the camera would not allow hostname to start with a number.

Version 3.16.0.248 – Released November 15, 2018

Issues Fixed

• Internal manufacturing test improvements

Version 3.16.0.202 – Released October 4, 2017

Issues Fixed

• Improved stability in the presence of occasional communication errors.

Version 3.16.0.170 – Released July 11, 2017

Issues Fixed

• Fixes critical vulnerability CVE-2017-9765. While the risk for Avigilon products installed behind a firewall or isolated network is limited, we highly recommend all users to update to this release.

Version 3.16.0.112 – Released May 30, 2017

Issues Fixed

• Manufacturing test improvements

Version 3.16.0.92 – Released April 10, 2017

New Features

• Added low power warning overlay if PoE power is used.
• Added low temperature cold start delay overlay if camera is powered up below minus 20ºC.
• Improved the ONVIF relative zoom moves to be more granular at the wide end and less granular at the tele end.
• Added support for HDSM SmartCodec

Issues Fixed

• Corrected an issue where privacy zones created at the far right edge can wrap around to the left edge or is smaller than intended.
• Corrected an issue where the camera may reboot if too many analytic objects are detected.
• Removed false certificate is expired warnings from logs during firmware upgrades.
• Improved WebUI privacy zone settings by including the drag to move arrow.
• Corrected an issue where E-Flip disabled setting is not retained during reboot or firmware upgrades
• Fixed an issue where the WebUI may crash while using the ‘Restore default’ button.
• Corrected the WebUI display to show the tilt limit is at 90 degrees when E-Flip is disabled.
• Corrected an issue resulting in poor audio input quality.
• Addressed an issue where the ONVIF subscription URL was not accounting for the URL query parameters.
• Removed the continuous and manual focus radio button options in the image and display settings

Version 3.16.0.54 – Released February 21, 2017

Issues Fixed

• Improvements to manufacturing tests

Version 3.16.0.40 – Released January 26, 2017

Issues Fixed

• Upgraded OpenSSL version to v1.0.2h.
• Camera power source is now displayed on the WebUI 'About' page.
• Increased maximum number of PTZ presets from 100 to 500.
• Fixed an issue where the MIB files occasionally generated an error upon upload.
• Fixed an issue where the wrong object type was returned for the SNMP Temperature ID.
• Spaces can now be used in naming 802.1X configuration.
• Fixed an issue where deleting a privacy zone would cause the next privacy zone to be not selectable in the WebUI.
• Improved the accuracy of the field of view when it is moved from home position through the WebUI.
• Fixed an issue where the manual exposure values configured via ONVIF are not displayed in the WebUI.
• Fixed the camera LED behavior upon start.
• Fixed an issue where the PTZ guard tour dwell times were not obeyed.
• Fixed an issue where the digital defog functionality would revert to the default settings after flicker or WDR settings changed.
• Fixed an issue where the camera would detect false motion at night when WDR was enabled.
• Fixed an issue where the ARP ping method could not be disabled in the WebUI.
• Added support for 802.1x server certification check.
• Fixed an issue where performing Restore to Factory Defaults would not restore the SNMP settings to default values.
• Fixed an issue where the time zone and day light savings settings would not revert to default settings when Restore Defaults is executed in the WebUI.
• Improved PTZ movement when using continuous move feature.
• Fixed an issue where setting the camera pan, tilt, zoom via ONVIF would vary from the configured destination.

Version 3.14.0.50 – Released Nov 17, 2016

Issues Fixed

• Corrected an issue where the camera may overshoot the pan and tilt target.
• Digital defog can now be configured in the WebUI.

Version 3.14.0.46 – Released Oct 21, 2016

Issues Fixed

• Corrected an issue where PTZ may not achieve home position properly depending on its current position.

Version 3.14.0.44 – Released Oct 7, 2016

Issues Fixed

• Corrected a manufacturing test issue.

Version 3.14.0.38 – Released Oct 4, 2016

• Initial FW release
• Compatible with the following display part numbers
• 1.0C-H4PTZ-DC45
• 1.0C-H4PTZ-DP45
• 2.0C-H4PTZ-DC30
• 2.0C-H4PTZ-DP30

H4 PTZ Camera MIB

Version 3.30.0.40 – Released Jan 4, 2020

• Compatible Management Information Base (MIB) release

Version 3.28.0.148 – Released Nov 19, 2019

• Compatible Management Information Base (MIB) release

Version 3.28.0.112 – Released Aug 16, 2019

• Compatible Management Information Base (MIB) release

Version 3.28.0.98 – Released Aug 1, 2019

• Compatible Management Information Base (MIB) release

Version 3.28.0.94 – Released July 25, 2019

• Compatible Management Information Base (MIB) release

Version 3.16.0.248 – Released November 15, 2018

• Compatible Management Information Base (MIB) release

Version 3.16.0.202 – Released Oct 4, 2017

• Compatible Management Information Base (MIB) release

Version 3.16.0.170 – Released July 11, 2017

• Compatible Management Information Base (MIB) release

Version 3.16.0.112 – Released May 30, 2017

• Compatible Management Information Base (MIB) release

Version 3.16.0.92 – Released Apr 10, 2017

• Compatible Management Information Base (MIB) release

Version 3.16.0.40 – Released Jan 26, 2017

• Compatible Management Information Base (MIB) release

Version 3.14.0.50 – Released Nov 17, 2016

• Management Information Base (MIB) to support version 3.14.0.50 of the firmware

Version 3.14.0.46 – Released Oct 21, 2016

• Initial release of Management Information Base (MIB) to support version 3.14.0.46 of the firmware

Camera Configuration Tool

Version 1.4.6.4 - Released Apr 28, 2020

Issues Fixed

• Fixed an issue where certain Analytics settings were not appearing
• Fixed an issue where discarding a large number of changes may result in unresponsive apply or cancel buttons
• Added feedback to users when attempting to overwrite an existing export file
• Fixed an issue where a disconnected camera continues to appear online in the listing
• Fixed an issue where searching for a camera at an invalid IP address now results in the correct error message
• Fixed an issue where settings changes on a camera WebUI is not reflected in CCT until the CCT tool is restarted
• Analytics inclusion area now appears correctly by default
• Increased the size of the model number filter pick list when working with a large number of different models of cameras
• Fixed an issue where an incorrect date format could cause CCT to unexpectedly terminate on file import
• Fixed a couple of issues where CCT would unexpectedly terminate

Version 1.4.4.0 - Released Nov 29, 2019

New Features

• In conjunction with removing default passwords on newly produced Avigilon cameras, encoders and Avigilon presence detector, CCT will not support setting an initial password on such devices.

Issues Fixed

• Fixed an issue where the CCT may crash if configuring the analytics on a 4MP or 6MP H5A camera

Version 1.4.2.2 - Released Sept 30, 2019

Issues Fixed

• Fixed an issue where the analytics configuration would no longer appear after a camera wasconnected to Genetec Security Center
• Fixed an issue where the inclusion area was not by default enabled when a new analytic rule iscreated.
• Bounding boxes are now appearing in the analytics configuration preview window

Version 1.4.2.0 - Released August 22, 2019

New Features

• Added support for H.265.

Issues Fixed

• Fixed an issue where the region of interest or line crossing regions for analytic events on certain cameras are rendered in a location different than the position saved on the camera. All users who have previously used CCT 1.4.0.0 to configure an area of interest or beam crossing event are recommended to use this version of CCT to double check that the configured region of interest matches the desired location.
• Removed support for fetching camera firmware from Avigilon FTP site. All Avigilon firmware has now been relocated to the Avigilon partner portal. Please see the user guide for information on how to manually download firmware and have CCT deploy the firmware updates to the cameras.
• Fixed an issue where certain cameras displayed an incorrect thumbnail preview image.
• Fixed multiple translation issues with various UI elements
• Fixed an issue where the application crashed with an unhandled exception.

Version 1.4.0.0 - Released April 4, 2019

New Features

• Added support for analytic events and analytic configuration on Avigilon cameras with self-learning video analytics and Unusual Motion Detection
• Passwords are hidden during bulk setup

Issues Fixed

• Corrected the ONVIF namespace used during camera discovery

Version 1.2.0.4 - Released November 30, 2018

New Features

• Added support for H4 Multisensor camera line.

Issues Fixed

• Fixed an issue where the tool does no display all the connected camera models under the ‘Model’ filter window if the list size exceeds the limited window size. The model filter window should now have a scroll bar functionality to display models hidden by the limited window size.
• Fixed an issue where the connected cameras are not discovered if the tool was launched when the network interface controller (NIC) was disabled and then enabled afterwards.

Known Issues

• When DHCP settings are changed along with other settings, the other settings fail to apply although CCT reports the changes have succeeded.

Version 1.2.02 - Released June 10, 2016

Issues Fixed

• Fixed an issue where changing the IP address and the names of multiple cameras at the same time causes the cameras to enter an error state.

Known Issues

• CCT cannot find cameras through a specific network interface controller (NIC) if the application is launched when the NIC is disabled.
• Reinstalling the same version of CCT prompts the user to uninstall the application.
• CCT stops responding if internet connection is lost while downloading firmware from the remote repository.
• False error message is shown if Ethernet cable is disconnected from the local computer while downloading firmware from the remote repository.
• Some column headers are not displayed.

Version 1.2.0.0 - Released March 31, 2016

New Features

• Update camera firmware from CCT.
• Automatically obtain latest Avigilon released firmware via CCT on command.
• Obtain and save multiple camera logs via CCT.
• Localized in the following languages: English, Chinese, French, German, Italian, Protuguese, Russian and Spanish.

Issues Fixed

• Supports Windows 7 32-bit Operating System
• WebUI links work with IE and Edge browsers if either one is set as the default browser.
• Supports Unicode characters in export and import configuration files.
• Installer allows users to go back a step and add the tool for all users on the computer.
• Improved UI so that the offline cameras and updated fields are easier to identify.
• Fixed an issue where CCT would accept an invalid IP address in the default gateway field.
• Fixed an issue where image quality settings would not display properly if it was configured from an imported file.
• Fixed an issue with sorting newly discovered cameras so that the filters apply correctly.

Known Issues

• CCT cannot find cameras through a specific network interface controller (NIC) if the application is launched when the NIC is disabled.
• Reinstalling the same version of CCT prompts the user to uninstall the application.
• CCT stops responding if the internet connection is lost while downloading firmware from the remote repository.
• False error message is shown if the Ethernet cable is disconnected from the local computer while downloading firmware from the remote repository.
• Serial number headers are not fully displayed in Russian.
• Some column headers are not displayed.

Version 1.0.0.0 - Released February 18, 2016

• Initial Avigilon Camera Configuration Tool release.