Micrologiciel de la caméra H4 Thermal

Version 3.28.0.128 – Parution le 19 septembre 2019

• Version initiale du micrologiciel des caméras thermiques H4 VGA suivantes :
• 640S-H4A-THC-BO50
• 640S-H4A-THC-BO24
• 640S-H4A-THC-BO12

Version 3.22.0.36 – Parution le 2 février 2019

• Corrige un problème relatif au micrologiciel version 3.18.0.34 induisant le redémarrage aléatoire de la caméra. Tous les utilisateurs doivent procéder à la mise à jour vers cette version.

Version 3.22.0.34 – Parution le 16 janvier 2018

• Résolution d'un problème d'escalade de privilèges des comptes opérateur et utilisateur où les commandes HTTP ou CGI sont exécutées en tant que compte d'administrateur. Nous recommandons vivement à tous les utilisateurs de procéder à la mise à jour vers cette version. 

Version 3.22.0.32 – Parution le 11 décembre 2017

• Version initiale du micrologiciel des caméras thermiques H4 QVGA suivantes :
• 320S-H4A-THC-BO50
• 320S-H4A-THC-BO24
• 320S-H4A-THC-BO12

Base d'informations de gestion de la caméra H4 Thermal

Version 3.28.0.128 – Parution le 19 septembre 2019

• Version de la base d'informations de gestion (MIB) compatible.
• Version du fichier MIB des caméras suivantes :
• 640S-H4A-THC-BO50
• 640S-H4A-THC-BO24
• 640S-H4A-THC-BO12

Version 3.22.0.36 – Parution le 2 février 2019

• Version de la base d'informations de gestion (MIB) compatible.

Version 3.22.0.34 – Parution le 16 janvier 2018

• Version de la base d'informations de gestion (MIB) compatible.

Version 3.22.0.32 – Parution le 11 décembre 2017

• Version de la base d'informations de gestion (MIB) des caméras suivantes :
• 320S-H4A-THC-BO50
• 320S-H4A-THC-BO24
• 320S-H4A-THC-BO12

Camera Configuration Tool

Version 1.4.4.0 - Released Nov 29, 2019

Nouvelles fonctionnalités

• In conjunction with removing default passwords on newly produced Avigilon cameras, encoders and Avigilon presence detector, CCT will not support setting an initial password on such devices.

Problèmes résolus

• Fixed an issue where the CCT may crash if configuring the analytics on a 4MP or 6MP H5A camera

Version 1.4.2.2 - Released Sept 30, 2019

Problèmes résolus

• Fixed an issue where the analytics configuration would no longer appear after a camera wasconnected to Genetec Security Center
• Fixed an issue where the inclusion area was not by default enabled when a new analytic rule iscreated.
• Bounding boxes are now appearing in the analytics configuration preview window

Version 1.4.2.0 - Released August 22, 2019

Nouvelles fonctionnalités

• Added support for H.265.

Problèmes résolus

• Fixed an issue where the region of interest or line crossing regions for analytic events on certain cameras are rendered in a location different than the position saved on the camera. All users who have previously used CCT 1.4.0.0 to configure an area of interest or beam crossing event are recommended to use this version of CCT to double check that the configured region of interest matches the desired location.
• Removed support for fetching camera firmware from Avigilon FTP site. All Avigilon firmware has now been relocated to the Avigilon partner portal. Please see the user guide for information on how to manually download firmware and have CCT deploy the firmware updates to the cameras.
• Fixed an issue where certain cameras displayed an incorrect thumbnail preview image.
• Fixed multiple translation issues with various UI elements
• Fixed an issue where the application crashed with an unhandled exception.

Version 1.4.0.0 - Released April 4, 2019

Nouvelles fonctionnalités

• Added support for analytic events and analytic configuration on Avigilon cameras with self-learning video analytics and Unusual Motion Detection
• Passwords are hidden during bulk setup

Problèmes résolus

• Corrected the ONVIF namespace used during camera discovery

Version 1.2.0.4 - Released November 30, 2018

Nouvelles fonctionnalités

• Added support for H4 Multisensor camera line.

Problèmes résolus

• Fixed an issue where the tool does no display all the connected camera models under the ‘Model’ filter window if the list size exceeds the limited window size. The model filter window should now have a scroll bar functionality to display models hidden by the limited window size.
• Fixed an issue where the connected cameras are not discovered if the tool was launched when the network interface controller (NIC) was disabled and then enabled afterwards.

Problèmes connus

• When DHCP settings are changed along with other settings, the other settings fail to apply although CCT reports the changes have succeeded.

Version 1.2.02 - Released June 10, 2016

Problèmes résolus

• Fixed an issue where changing the IP address and the names of multiple cameras at the same time causes the cameras to enter an error state.

Problèmes connus

• CCT cannot find cameras through a specific network interface controller (NIC) if the application is launched when the NIC is disabled.
• Reinstalling the same version of CCT prompts the user to uninstall the application.
• CCT stops responding if internet connection is lost while downloading firmware from the remote repository.
• False error message is shown if Ethernet cable is disconnected from the local computer while downloading firmware from the remote repository.
• Some column headers are not displayed.

Version 1.2.0.0 - Released March 31, 2016

Nouvelles fonctionnalités

• Update camera firmware from CCT.
• Automatically obtain latest Avigilon released firmware via CCT on command.
• Obtain and save multiple camera logs via CCT.
• Localized in the following languages: English, Chinese, French, German, Italian, Protuguese, Russian and Spanish.

Problèmes résolus

• Supports Windows 7 32-bit Operating System
• WebUI links work with IE and Edge browsers if either one is set as the default browser.
• Supports Unicode characters in export and import configuration files.
• Installer allows users to go back a step and add the tool for all users on the computer.
• Improved UI so that the offline cameras and updated fields are easier to identify.
• Fixed an issue where CCT would accept an invalid IP address in the default gateway field.
• Fixed an issue where image quality settings would not display properly if it was configured from an imported file.
• Fixed an issue with sorting newly discovered cameras so that the filters apply correctly.

Problèmes connus

• CCT cannot find cameras through a specific network interface controller (NIC) if the application is launched when the NIC is disabled.
• Reinstalling the same version of CCT prompts the user to uninstall the application.
• CCT stops responding if the internet connection is lost while downloading firmware from the remote repository.
• False error message is shown if the Ethernet cable is disconnected from the local computer while downloading firmware from the remote repository.
• Serial number headers are not fully displayed in Russian.
• Some column headers are not displayed.

Version 1.0.0.0 - Released February 18, 2016

• Initial Avigilon Camera Configuration Tool release.